New products at a
pace. New designs, conceived,
developed, built, finished and lighted, on a regular pace. This is
outlined on my
Inside Solid-State Lighting Blog.
Below are a small sampling of designs completed prior to 2010. Click on the thumbnail images
for a larger view.
Molex RM2 GU24 modules
incorporating Seoul Semiconductor 4.5W 120VAC Acriche LEDs.
Aimable reflectors direct light onto target surface and can
be rotated independently. Modules provided courtesy of Molex
Inc. Molex also commissioned a limited edition of 10 of
these lamps following ArchLED09 presentation. DETAILS
Raw steel welded and ground
housing, LynkLabs 12VAC LED modular strips and LynkLabs
smart power supply. Using warm and cool CCT LEDs, the lamps
produces low level warm CCT and high level neutral CCT level
settings. LEDs and power supply courtesy of LynkLabs. DETAILS
Lamina Atlas I R-G-B LEDs. Each pyramid incorporates
and integral 120VAC to 18VDC power supply and (3) LuxDrive 700mA constant current BuckPuck
adjustable and dimmable drivers purchased from LED Supply.
Each color is manually controlled.
Fiberglass springs and ratchet
mechanism task light using 12 Nichia Rigel .5W LEDs mounted
to custom circuit boards produced by PC Board Express. Two
Advance Xitanium 350mA drivers were disassembled and placed
in clear polycarbonate tubes, hi-lo lighting control. LEDs
courtesy of Nichia. Product not available for sale. DETAILS
Three stems with lighted flames
and base feature. Utilizes (7) 3W Seoul Semiconductor P4
LEDs purchased from Mouser Electronics, driven by (2)
LuxDrive 700mA constant current BuckPuck adjustable and
dimmable drivers. Dimming of base
and flame lights separately. DETAILS